This paper presents an inductorless static 2:1 frequency divider operating up to 60 GHz. In order to save the chip area no peaking inductors are used in this design. Alternatively, to achieve the high operating frequency, the range is extended by asymmetrical sizing of the data and latch transistors and by reducing the load of the following buffer stage. The load reduction is achieved by means of a gate-drain capacitance neutralization in the following differential buffer stage. The circuit is realized in a 28 nm CMOS technology. Measurements show that the divider exhibits a maximum operating frequency of 60 GHz and features an input sensitivity below 0 dBm over a broad input frequency range of 34 GHz. The divider core consumes 7.3 mA from a single 0.9 V supply.
Issakov, V, Parvais, B, Vaesen, K, Vidojkovic, V & Wambacq, P 2013, A 6.6 mW inductorless static 2:1 frequency divider operating up to 60 GHz in 28 nm CMOS. in 2013 IEEE International Conference on Microwaves, Communications, Antennas and Electronics Systems. IEEE, pp. 1-5, 2013 IEEE International Conference on Microwaves, Communications, Antennas and Electronics Systems, Tel Aviv, Israel, 21/10/13. https://doi.org/10.1109/COMCAS.2013.6685311
Issakov, V., Parvais, B., Vaesen, K., Vidojkovic, V., & Wambacq, P. (2013). A 6.6 mW inductorless static 2:1 frequency divider operating up to 60 GHz in 28 nm CMOS. In 2013 IEEE International Conference on Microwaves, Communications, Antennas and Electronics Systems (pp. 1-5). IEEE. https://doi.org/10.1109/COMCAS.2013.6685311
@inproceedings{40df0d899d4c4780896ff7d136ea9bf3,
title = "A 6.6 mW inductorless static 2:1 frequency divider operating up to 60 GHz in 28 nm CMOS",
abstract = "This paper presents an inductorless static 2:1 frequency divider operating up to 60 GHz. In order to save the chip area no peaking inductors are used in this design. Alternatively, to achieve the high operating frequency, the range is extended by asymmetrical sizing of the data and latch transistors and by reducing the load of the following buffer stage. The load reduction is achieved by means of a gate-drain capacitance neutralization in the following differential buffer stage. The circuit is realized in a 28 nm CMOS technology. Measurements show that the divider exhibits a maximum operating frequency of 60 GHz and features an input sensitivity below 0 dBm over a broad input frequency range of 34 GHz. The divider core consumes 7.3 mA from a single 0.9 V supply.",
author = "Vadim Issakov and Bertrand Parvais and Kristof Vaesen and Vojkan Vidojkovic and Piet Wambacq",
year = "2013",
doi = "10.1109/COMCAS.2013.6685311",
language = "English",
pages = "1--5",
booktitle = "2013 IEEE International Conference on Microwaves, Communications, Antennas and Electronics Systems",
publisher = "IEEE",
note = "2013 IEEE International Conference on Microwaves, Communications, Antennas and Electronics Systems, COMCAS ; Conference date: 21-10-2013 Through 23-10-2013",
url = "http://www.ieee.org/conferences_events/conferences/conferencedetails/index.html?Conf_ID=30834",
}