Carbon nanofibers (CNFs) is a typical electrical loss material with strong permittivity that has been widely used in the field of electromagnetic shielding, attenuation, and reception. However, studies have demonstrated that the unstable anisotropic EM behavior exhibited by CNFs in the terahertz domain hinders its application in the tremendously high frequency domain. In this study, ZnO is used to perform surface modification of CNFs based on the sputtering method, which effectively eliminate the anisotropic EM behavior of CNFs at different irradiation angles in the sub-terahertz band. ZnO coated the surface of fiber wall comprehensively in the form of nano-scale. The results show that after the surface modification, the composite sample exhibits a stable isotropic EM response in the sub-terahertz band of 500-750 GHz. Also, in the frequency range of 551-563 GHz (bandwidth: 12 GHz), ZnO not only acts as a stabilizer, but also enhances the absorption performance of the original CNFs by 6%, which is up to 92%. In the frequency range of 660-690 GHz (bandwidth: 30 GHz), the composite sample and the pure CNFs sample have similar wave absorption performance with about 75%, the maximum difference is less than 5%, and the minimum is about 2.6%.
Cheng, C, Zhao, W, Zhang, H, Hauffman, T, Zhang, Z & Stiens, J 2023, 'Improvement of absorbing stability of carbon nanofibers in sub-terahertz domain using the surface modification of zinc oxide', Ceramics International, vol. 49, no. 11, pp. 18491-18501. https://doi.org/10.1016/j.ceramint.2023.02.222
Cheng, C., Zhao, W., Zhang, H., Hauffman, T., Zhang, Z., & Stiens, J. (2023). Improvement of absorbing stability of carbon nanofibers in sub-terahertz domain using the surface modification of zinc oxide. Ceramics International, 49(11), 18491-18501. https://doi.org/10.1016/j.ceramint.2023.02.222
@article{fd9d6da60027478e9410180228617b04,
title = "Improvement of absorbing stability of carbon nanofibers in sub-terahertz domain using the surface modification of zinc oxide",
abstract = "Carbon nanofibers (CNFs) is a typical electrical loss material with strong permittivity that has been widely used in the field of electromagnetic shielding, attenuation, and reception. However, studies have demonstrated that the unstable anisotropic EM behavior exhibited by CNFs in the terahertz domain hinders its application in the tremendously high frequency domain. In this study, ZnO is used to perform surface modification of CNFs based on the sputtering method, which effectively eliminate the anisotropic EM behavior of CNFs at different irradiation angles in the sub-terahertz band. ZnO coated the surface of fiber wall comprehensively in the form of nano-scale. The results show that after the surface modification, the composite sample exhibits a stable isotropic EM response in the sub-terahertz band of 500-750 GHz. Also, in the frequency range of 551-563 GHz (bandwidth: 12 GHz), ZnO not only acts as a stabilizer, but also enhances the absorption performance of the original CNFs by 6%, which is up to 92%. In the frequency range of 660-690 GHz (bandwidth: 30 GHz), the composite sample and the pure CNFs sample have similar wave absorption performance with about 75%, the maximum difference is less than 5%, and the minimum is about 2.6%. ",
keywords = "Carbon nanofibers, ZnO, Electromagnetic anisotropy, Chemical vapor deposition, Terahertz vector network analyzer.",
author = "Chen Cheng and Wu Zhao and Huiyao Zhang and Tom Hauffman and Zhiyong Zhang and Johan Stiens",
note = "Funding Information: The authors of Vrije Universiteit Brussel ( VUB ) and Interuniversity Microelectronic Center (IMEC) acknowledge the funding by the SRP-project M3D2 ; the ETRO-IOF242 project; heartfelt acknowledge the OZR-3251 project (“GHz-THz VNA measurement infrastructure: from benchtop to portable instruments{"}), which provides a strong economic guarantee for the establishment of the THz-VNA platform in this study. The authors of Northwest University ( NWU ) acknowledge the funding by the Youth Foundation of Shaanxi Natural Science Foundation ( 2023-JC-QN-0700 ), and thank for the support of Xi'an New Low-dimensional Materials and Devices and Terahertz Technology International Science and Technology Cooperation Base . Publisher Copyright: {\textcopyright} 2023 Elsevier Ltd and Techna Group S.r.l. Copyright: Copyright 2023 Elsevier B.V., All rights reserved.",
year = "2023",
month = jun,
day = "1",
doi = "10.1016/j.ceramint.2023.02.222",
language = "English",
volume = "49",
pages = "18491--18501",
journal = "Ceramics International",
issn = "0272-8842",
publisher = "Elsevier Limited",
number = "11",
}